TWCS Throttle Detente With 10, 50, And 90% Detentes 3D Printer Model
The file 'TWCS Throttle Detente With 10, 50, And 90% Detentes 3D Printer Model' is (ipt,stl) file type, size is 1.9MB.
The file 'TWCS Throttle Detente With 10, 50, And 90% Detentes 3D Printer Model' is (ipt,stl) file type, size is 1.9MB.
This is a revised A320 Throttle Detent for the TWCS to allow for a generic 10, 50, and 90 degree detente with a revised detente runner, label, as well as an improved detente attached to the throttle for better contact, easier to print, better feel, easy to assemble, and more effective indexing for position.
It is designed to be installed with 3M heavy duty double sided mounting tape.
https://www.amazon.com/gp/product/B007Y7H5GO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Printing
Print the detente part sideways such that the curve of the detente is is parallel with the build plate for smoothness.
Assembly:
Apply tape to the interface between the throttle reinforced and the Throttle
Apply tape between the Base and the Throttle base
Apply tape on the "detente" that connects to the base.
Post work:
See original developer for fitment images
https://www.thingiverse.com/thing:6437037
IPT's attached for modification.
| 50_Detente.ipt | 319.0KB | |
| 50_Detente.stl | 4.2KB | |
| 50_Labeling.ipt | 1.0MB | |
| 50_Labeling.stl | 162.2KB | |
| Base.ipt | 249.0KB | |
| Base.stl | 15.7KB | |
| Throttle_Reinforced.ipt | 363.0KB | |
| Throttle_Reinforced.stl | 30.8KB |
