Turtle Topper ($7 Cane/Walking Hiking Sticks) 3D Printer Model
The file 'Turtle Topper ($7 Cane/Walking Hiking Sticks) 3D Printer Model' is (stl) file type, size is 15.3MB.
The file 'Turtle Topper ($7 Cane/Walking Hiking Sticks) 3D Printer Model' is (stl) file type, size is 15.3MB.
If images are not showing on this page, you can view images of my recent Things here: https://tinyurl.com/y4redcxv or this Video: https://youtu.be/7nOVzmJfe6w
If you want to make a taller stick/staff, grab my 1" cane coupler from here:
https://www.thingiverse.com/thing:3810485
Also, check out my 1" wall mount clips for displaying your canes/sticks: https://www.thingiverse.com/thing:3845550
You can make an awesome solid oak cane / walking stick for about $7. In addition to the printed topper of your choice you will need a 1” oak dowel which costs about $6 at Home Depot and a 1” rubber leg tip – about $4 for 4 of them. Links below are just for your reference so you know what to buy:
1” Oak Dowel: https://www.homedepot.com/p/Builder-s-Choice-1-in-x-36-in-Oak-Round-Dowel-HDDO136/206184686
1” Leg Tip: https://www.amazon.com/gp/product/B000QD30TE
The topper .stl file is sized for the 1” dowel if printed at 100%. If you want to use for a different size stick – just adjust accordingly.
I print at 20% infill and then paint and coat with a 2-part epoxy resin to add the deep gloss and strength.
https://www.amazon.com/gp/product/B07BM9LHRB
Just print the topper, glue to the finished dowel (sand and clear coat)with desired adhesive (I just use some of the 2-part resin I have mixed up for the final topper coat. You will end up with an awesome walking stick – or more if you are into collecting as I will be doing a lot of these.
| Turtle-Topper.stl | 20.6MB |
