Turtle Shell Racer High Power (NewBright #1680) 3D Printer Model
The file 'Turtle Shell Racer High Power (NewBright #1680) 3D Printer Model' is (stl,zip,skp) file type, size is 2.0MB.
The file 'Turtle Shell Racer High Power (NewBright #1680) 3D Printer Model' is (stl,zip,skp) file type, size is 2.0MB.
This is a version of Skimbal's Turtle Shell Racer High Power, slightly modified to work with the New Bright #1680 model RC car. The original called for #2424 which does not seem to be available any longer. #1680 is available at Target as of this writing (May 2012)
All the original files have been run through netfabb to fix slicing errors. There are a couple of new files and/or modifications needed - see the instructions.
| 1_Spike_fixed.stl | 8.6KB | |
| 22541.zip | 1.0MB | |
| 4_Spikes_fixed.stl | 34.1KB | |
| Drive_Gear_fixed.stl | 84.3KB | |
| FrontSuspension_fixed.stl | 58.1KB | |
| Gear1and3_fixed.stl | 146.8KB | |
| Gear2_fixed.stl | 172.2KB | |
| GearboxBody_fixed.stl | 88.6KB | |
| Gearbox_Bracket_fixed.stl | 35.1KB | |
| Gearbox_Latch_fixed.stl | 33.9KB | |
| NutCollar.skp | 54.5KB | |
| NutCollar.stl | 9.9KB | |
| RearWheel_fixed.stl | 130.2KB | |
| Rear_Axle_Brackets_fixed.stl | 45.0KB | |
| ShellTopB_fixed.stl | 82.4KB | |
| Shell_Back_A_fixed.stl | 161.9KB | |
| Shell_Back_B_fixed.stl | 161.9KB | |
| Shell_Front_A_fixed.stl | 134.8KB | |
| Shell_Front_B_fixed.stl | 134.8KB | |
| Shell_Top_A_fixed.stl | 82.3KB | |
| steering_linkage-1680.stl | 14.7KB | |
| Wings_fixed.stl | 805.4KB |
