This is a screen holder designed for use with the Turnigy TGY-i6 and attached to it's handle. The screen I used for this was a "Car 4.3" TFT LCD Color Rearview Monitor for DVD GPS" off of eBay. Note- The Screen Holder .STL appears to be flat. It is NOT flat by any means and I suggest printing it standing up with support.
The bolts and nuts used were M3x15mm bolts and M3 nuts (the bolts can be more or less probably a 5mm min length bolt.) Qty 4 of each needed.
To assemble remove the screen original bracket and replace with the printed one. Then add the 2 tabs with the bolts.
| TGY-i6_ScreenHolder.stl | 2.6MB | |
| TGY-i6_ScreenTab.stl | 203.7KB |
