Turkey Box Table Favor - Remix
This is a small Thanksgiving-themed table favor box sized to hold two Andes mints.
The turkey, which is intended to be glued to the box cover, is a remix of "Turkey Shootout!" posted by MrKindergarten on November 21, 2017.
https://www.thingiverse.com/thing:2662303
I've modified it by eliminating the semicircular feature on the base and including the text "2024" This model is also resized to approximately 35 mm X 28 mm.
The box is 45 mm X 30 mm and is sized to contain two Andes mints. The corners of both box and lid are radiused but the top and bottom edges are not.
The box and lid are combined into a single model.
EDIT - 11/23/24: Added rev 1, with 0.75 mm chamfers on bottom of box and top of lid. Original stl file without chamfers still available.
Printing Notes:
Material: PLA
Nozzle: 0.4 mm
Layer Height, box and Lid: 0.2 mm
Layer Height, turkey; 0.075 mm
Shells: 0.8 mm
Infill: 16 mm (probably doesn't matter much)
| Box__Lid_45_X_30_rev_0.stl | 18.4KB | |
| Box__Lid_45_X_30_rev_1.stl | 22.3KB | |
| Turkey_B_rev_2.stl | 109.8KB |
