Turboprop Engine 3D Printer Model Free Download

Description Files (76)

Summary

This is a cutaway model of Turboprop Engine having following features for educational purpose.
Features are:
(1) Centrifugal (Impeller type) compressor
(2) Can type Combustion Chamber
(3) Axial Flow Turbine
(4) Reduction gears and propeller shaft
(5) Air inlet cowling with Oil Cooler Air Passage

Download files includes;
-files: STL Files
-images: STL File Figure and Index Picture for assembly Aid

Purchase Parts Information;
-Bearings
WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel
F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel
689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller
6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft

-Aluminum Tubes
9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends)
6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft

-Screws
Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut),
Head side flange hole is 1.5 mm dia.
Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts
Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV
Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling

Assembly Points

Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
Combustion Air Casing is slid to the outlet elbow assembly until aft end clears from the turbine case its bore at first. Then slide back to bore. Gluing is optional.
Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.

Total Net Print Time: Approx. 50 HR

(Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted.

[Update] 2018.8.13
This is the original design for the followings. Please refer them.

Mod Parts : https://www.thingiverse.com/thing:2416610
Mod Parts2 : https://www.thingiverse.com/thing:2747907
Mod Parts3 : https://www.thingiverse.com/thing:2792220
[Update] 2018.8.22
Add "Assembly Charts" (pdf format) and figures are added to assist for assembly.
[Update] 2018.9.4
Parts List including Mod-Parts and Identification of rotaing parts.
[Update] 20180913
Add the optional part "Reduction-Panel03f" for "Reduction-Panel03"
[Update] 20181025
Add "Mount-Foot101" called in "Assembly Charts"
[Update] 20190907
I have prepared the detailed Assembly Manual as an option for those who want to build this engine with a small amount of money. Please browse if you are interested in this.
https://cults3d.com/en/3d-model/tool/turboprop-engine-assembly-manual-option
[Update]20200506
"Flange-Screw01" figure added about M1.4 Screw.
[Update]20201018
Add "Shaft-Coupling 101.stl" having thicker wall.

Accy-Parts-FMU101.stl	71.2KB
Accy-Parts-PCU101.stl	114.2KB
Accy-Parts-RH-Base101.stl	113.0KB
Accy-Parts-SM-Base101.stl	45.2KB
Accy-Parts-SM101.stl	60.9KB
Accy-Parts-SM102.stl	25.9KB
Air-Intake-Case101.stl	1.7MB
Air-Intake-Cover101.stl	219.3KB
Air-Intake-Cowling02.stl	162.4KB
Air-Intake-Cowling301.stl	1.5MB
Air-Intake-Fairing101.stl	349.3KB
Assembly-Chart01.pdf	909.3KB
CC-Aircase01.stl	720.6KB
CC-Aircase03.stl	332.9KB
CC-Aircase04.stl	453.3KB
CC-Flame-Tube01x95.stl	1.1MB
CC-Flame-Tube02x95.stl	677.9KB
CC-Flame-Tube03x95m.stl	581.6KB
Comp-Frt-Case02.stl	1.2MB
Comp-HP-Diffuser01.stl	70.1KB
Comp-IGV-Case01.stl	602.1KB
Comp-IGV-Case02.stl	510.4KB
Comp-Inter-Case01.stl	1.8MB
Comp-LP-Diffuser01.stl	68.4KB
Comp-Outlet-Case101.stl	1.2MB
Exhaust-Duct101.stl	728.9KB
Exhaust-Duct102.stl	1.0MB
Imp-Coupling01.stl	132.7KB
Impeller-HP02.stl	665.9KB
Impeller-LP02.stl	800.6KB
Interm-Case-Cut01.stl	420.4KB
Interm-Case-Cut02.stl	91.2KB
Interm-Case02a.stl	254.4KB
Interm-Case03a.stl	281.8KB
Mount-Foot101.stl	193.7KB
Oil-Cooler-Inlet201.stl	197.3KB
Oil-Cooler-Outlet101.stl	361.8KB
Oil-Cooler101.stl	82.4KB
Oil-Cooler102.stl	431.1KB
Oil-Press-Tx01.stl	208.9KB
Outlet-Elbow-Assy101.stl	3.8MB
Outlet-Elbow02.stl	61.7KB
Part_List_ABC_Seq.xlsx	11.8KB
Part_List_Index_No-Rev1.xlsx	12.0KB
Part_List_Index_No.xlsx	11.5KB
Red-Prop-Shaft101.stl	298.4KB
Reduction-Gear-Flg01.stl	103.1KB
Reduction-Gear-Flg02.stl	326.4KB
Reduction-Gear01a.stl	528.3KB
Reduction-Gear01b.stl	349.6KB
Reduction-Gear02.stl	568.1KB
Reduction-Gear03.stl	275.5KB
Reduction-Panel01.stl	133.2KB
Reduction-Panel01a.stl	10.6KB
Reduction-Panel02.stl	87.6KB
Reduction-Panel03.stl	61.0KB
Reduction-Panel03f.stl	116.0KB
Shaft-Brg-Spt01.stl	30.9KB
Shaft-Brg-Spt02.stl	26.4KB
Shaft-Coupling01.stl	26.2KB
Shaft-Coupling03.stl	71.5KB
Shaft-Coupling101.stl	51.4KB
Shaft-Spacer04.stl	33.8KB
Shaft-Spacer201.stl	30.1KB
Stand101.stl	50.3KB
Stand102.stl	14.6KB
Turbine-Case01a.stl	464.5KB
Turbine-Case01b.stl	209.8KB
Turbine-HP-NGV01.stl	225.4KB
Turbine-HP-Rotor01.stl	470.7KB
Turbine-IP-NGV01.stl	343.2KB
Turbine-IP-Rotor01.stl	488.9KB
Turbine-LP-NGV01.stl	428.6KB
Turbine-LP-Rotor01.stl	465.3KB
Turbine-Shaft-Spacer02.stl	28.8KB
Turbine-Shaft01.stl	504.7KB

Turboprop Engine 3D Printer Model

Summary

Tags

You might also like