The file 'Turbojet Compressor Prototypes 3D Printer Model' is (stl,dxf,3mf) file type, size is 19.1MB.
These are the 5 prototypes of centrifugal compressor I designed when trying to make a small homebuilt turbojet. I was not able to get it self sustaining, but that doesn't mean all these compressors are bad. With varying compression ratios, they can be driven by electric motor or from a turbine wheel and are capable of providing about 4-6 PSI of pressure. Designed to fit around stainless cooking pots, these compressor prototypes are perfect for anyone trying to build a jet engine with basic materials. I have also provided .3mf mesh assemblies and .dxf files for laser cutting the turbine wheel and stators. To form the blades of the stators and turbine wheel, Press the "turbine formers" and "stator formers" together with the turbine wheel or stator plate in the middle.
| bearing_holder_v5.stl | 50.2KB | |
| bearing_plate_v1.stl | 111.8KB | |
| diffuser_v3.stl | 4.5MB | |
| diffuser_v4.stl | 3.8MB | |
| diffuser_v5.stl | 3.3MB | |
| friction_rod_and_motor_pusher_v2.stl | 28.5KB | |
| front_plate.dxf | 9.7KB | |
| gasket_v3-v4.stl | 563.6KB | |
| gasket_v5.stl | 220.8KB | |
| Impeller_for_v0-v2.stl | 2.2MB | |
| Impeller_for_v3-v4.stl | 3.3MB | |
| Impeller_v5.stl | 2.6MB | |
| shroud_diffuser_v0.stl | 1.2MB | |
| shroud_diffuser_v1.stl | 3.7MB | |
| shroud_diffuser_v2.stl | 3.9MB | |
| shroud_v3.stl | 7.7MB | |
| shroud_v4.stl | 5.8MB | |
| shroud_v5.stl | 568.1KB | |
| starter_mount_slider_v2.stl | 583.1KB | |
| starter_mount_v2.stl | 1.4MB | |
| stators.stl | 530.7KB | |
| stator_fixed.dxf | 15.8KB | |
| stator_former_pt1.stl | 171.9KB | |
| stator_former_pt2.stl | 163.9KB | |
| turbine_former_pt1.stl | 731.7KB | |
| turbine_former_pt2.stl | 539.7KB | |
| turbine_v4_v20.3mf | 4.5MB | |
| turbine_v4_v29.3mf | 5.1MB | |
| turbine_wheel.stl | 717.7KB | |
| turbine_wheel__fixed.dxf | 7.3KB |
