Turbofan 9000 Air Gun 3D Printer Model
The file 'Turbofan 9000 Air Gun 3D Printer Model' is (stl,STL) file type, size is 497.3KB.
The file 'Turbofan 9000 Air Gun 3D Printer Model' is (stl,STL) file type, size is 497.3KB.
This is a remix of wbanw's Turbo Air Blower Fan - https://www.thingiverse.com/thing:6543586, thank you to him for designing the original.
Modified parts are the nozzle, which was changed to a curved design and a smaller outlet diameter for increased velocity, the rear cover which was changed to a honeycomb pattern and is slightly less restrictive, one of the side covers which has the (hilarious) name etched into it and the switch area which has two parts made to modify it so that it is compatible with the switch that I used and also allows for the ergonomic grip to be attached. I have also added in the use of a balance charger module as the original design was not connecting the batteries properly and wasn't capable of monitoring and maintaining individual cell voltages, which can be dangerous long term.
All the modifications are compatible with his original design, so you can choose what you prefer however if you want to use the grip attachment it only connects to my switch modification so you will need to use the same toggle switch that I have used.
| base.stl | 62.6KB | |
| nozzle_new.STL | 545.3KB | |
| rear_cover_mesh_design.STL | 185.8KB | |
| side1.stl | 36.2KB | |
| side2.stl | 32.1KB | |
| side2_new.STL | 247.3KB | |
| switch_modifier_grip_bottom.STL | 286.0KB | |
| switch_modifier_grip_top.STL | 33.3KB | |
| top_duct.stl | 131.0KB |
