Turbo Racing 1/76 Mini RC Race Track Barrier 3D Printer Model
The file 'Turbo Racing 1/76 Mini RC Race Track Barrier 3D Printer Model' is (stl) file type, size is 218.4KB.
The file 'Turbo Racing 1/76 Mini RC Race Track Barrier 3D Printer Model' is (stl) file type, size is 218.4KB.
An assortment of connectable track barriers for mini RC vehicles, I sized these for Turbo Racing 1/76 RC cars. Would also work well with Kyosho DNano or Sturmkind Dr!ft.
Remixed from Meistro's excellent little single barrier piece. I reduced the height to reduce printing time & filament as you need a lot of pieces to make a full track, and then made all the shapes and lengths I needed to use my small floorspace to maximum effect.
The two tracks shown have approximate widths of 20cm for the larger one and 15cm for the smaller one, both are driveable with overtaking possible with the 1/76 Turbo Racing cars
Printed on - GeeeTech i3
Layer Height - 0.4mm
Supports - No
Infill - 10%
Walls - 3
Material - PLA
The parts click together and apart easily either directly into each other or can be slotted together from the top. they are a tight fit so an impact from the small Turbo Racing cars does not make the track shape bend and they stay in the same shape.
| Mini_Race_Track.stl | 11.6KB | |
| Mini_Race_Track_1.stl | 11.6KB | |
| Mini_Race_Track_10.stl | 49.5KB | |
| Mini_Race_Track_11.stl | 49.5KB | |
| Mini_Race_Track_12.stl | 19.0KB | |
| Mini_Race_Track_13.stl | 19.0KB | |
| Mini_Race_Track_14.stl | 18.6KB | |
| Mini_Race_Track_15.stl | 18.6KB | |
| Mini_Race_Track_16.stl | 88.6KB | |
| Mini_Race_Track_17.stl | 88.6KB | |
| Mini_Race_Track_18.stl | 17.6KB | |
| Mini_Race_Track_19.stl | 17.6KB | |
| Mini_Race_Track_2.stl | 11.6KB | |
| Mini_Race_Track_3.stl | 10.9KB | |
| Mini_Race_Track_4.stl | 12.4KB | |
| Mini_Race_Track_5.stl | 110.6KB | |
| Mini_Race_Track_6.stl | 112.5KB | |
| Mini_Race_Track_7.stl | 11.6KB | |
| Mini_Race_Track_8.stl | 60.7KB | |
| Mini_Race_Track_9.stl | 60.7KB |
