This is a TPU replacement list for a Tupperware 1607-15 lid used on spaghetti storage container.

It is designed for Flex material and may not be usable with others.

This has a seal on the outside and the inside of the lid brim.

The lid surface is 2.2mm thick to cut down on the porous attributes of printing flex.

Some dimensions

lip diameter at the top 84.4mm

lip diamerter at the bottom 83.2mm

lip height is about 8.3mm

Printed at .2mm with .4mm nozzle

No supports needed.

One option has a fork with spaghetti in the image, but with flex and being the first two layers may not render well because of the small lines.

I did create this with the CAN TPU LID generator. You will find it on the pre-configured menu list... or you can customize and make your own.