This is my 3D-Printed RC Tugboat.
I will upload a video to my youtube chanel and add it here.
Recommendations:
Print the walls thick enough, so no water can enter through tiny gaps in the wall.
In the cabine is a hohle, where you can unplug the battery from the ESC. If this is
not used, you can glue the hatch. If you have a switch you can screw it under the
stair in the window.
If you use PLA to print the boat, I can recommend to glue the hull with silicone.
If there are any questions just ask!
| antenna.stl | 3.4KB | |
| battery_holder.stl | 5.9KB | |
| hatch.stl | 1.4KB | |
| hull_part_1.stl | 2.0MB | |
| hull_part_2.stl | 768.4KB | |
| hull_part_3.stl | 1.3MB | |
| roof.stl | 1.1KB | |
| rudder.stl | 46.0KB | |
| ship_deck_part_1_2.stl | 143.1KB | |
| ship_deck_part_2_1.stl | 34.3KB | |
| ship_deck_part_3.stl | 196.8KB | |
| ship_deck_part_3_1.stl | 196.8KB | |
| ship_deck_part__4.stl | 44.1KB | |
| stair.stl | 5.1KB |
