Though You can find hundreds of different bag clips in large stores, I couldn't find a clip that would help to close the bags airtight, that I often got with 3D printing material. The available clips were all too short, because the longest one found was around 290mm, and for the bags I would need around 320mm to fit. Also the available clips are made for thinner bags, like e.g. used with chips, so I couldn't even slide them on.
So I designed my one clips, with the goal, that they can be printed easily without any support! My only problem was, that even when I printed them diagonally on my Ender 3 Pro, I could only print around 285mm long clips. Some weeks ago a friend of mine bought a printer with a larger build plate, where it is now possible to print clips longer than 285mm. Because he was so fond of these clips, I decided to publish them.
Then I also found, that I also can use shorter ones for spiced speculoos, where also the normally available clips won't fit because of the thickness of the bag, so I added some more lengths.
Maybe they are also useful for anybody else. :-)
| Tuetenclip_110mm.stl | 37.8KB | |
| Tuetenclip_150mm.stl | 37.8KB | |
| Tuetenclip_195mm.stl | 37.8KB | |
| Tuetenclip_225mm.stl | 37.8KB | |
| Tuetenclip_285mm.stl | 37.8KB | |
| Tuetenclip_325mm.stl | 37.8KB | |
| Tuetenclip_70mm.stl | 37.8KB |
