A portable dice tower that can also carry dice when closed. You can use up to 28mm max-diameter dice with the included STLs, but you can use Thingiverse Customizer or OpenSCAD to modify that. You can also change other aspects of the tower, like adding sockets for magnets (if you want the "tray" to stay in place better when it is in "tower" mode).
The tower is designed to print with no supports. All overhangs are short enough that they can bridge without major print flaws.
Note: The included STL files DO NOT have the magnet slot, but the pictures do. This is because I figured most people don't have the same magnets I do. If you want to use magnets, be sure to use Customizer to add the ones you need!
Update 11-13-23: Knurling and magnet toggles weren't working in the Thingiverse Customizer. The OpenSCAD file was updated to version 8 with a fix.
| DEMO_Closed_-_DO_NOT_PRINT.stl | 5.7MB | |
| DEMO_Opened_-_DO_NOT_PRINT.stl | 6.3MB | |
| Tube-O-Dice_-_All_Parts_-_28mm.stl | 6.4MB | |
| Tube-O-Dice_-_Bottom_Cap_Only_-_28mm.stl | 2.7MB | |
| Tube-O-Dice_-_Top_Cap_Only_-_28mm.stl | 1.1MB | |
| Tube-O-Dice_-_Tower_Only_-_28mm.stl | 2.6MB | |
| Tube-O-Dice_v08.scad | 31.8KB |
