Tube Launch Model Rocket 3D Printer Model
The file 'Tube Launch Model Rocket 3D Printer Model' is (stl) file type, size is 445.1KB.
The file 'Tube Launch Model Rocket 3D Printer Model' is (stl) file type, size is 445.1KB.
This is a experimental rocket designed to launch out of a 3 inch tube. It is still heavily in development and not for flight. The design was based off of the Javelin Missile. The rocket is fully 3d printed. The fins pop out via springs or rubber bands and work really well. It has a piston ejection system built in the parachute bay. It can also be extended with a coupler to carry a significantly large payload. I still got a lot of tweaks I must do to get this rocket flying! If you have a any name suggestions or design changes, feel free to contact me through the website or through thingiverse! This was printed with my old and horrible monoprice, and I can't wait to print it with my much better prusa! I hope you like it! It is not meant to be flown yet, but at anytime, fly at your own risk!
Disclaimer: ROCKETRY IS DANGEROUS, USE ANY ROCKETRY COMPONENTS, 3D PRINTS, AND FILES BY Canine Rocket Technologies AT YOUR OWN RISK!
| bottom_fin.stl | 19.4KB | |
| bottom_tube.stl | 129.6KB | |
| coupler.stl | 141.0KB | |
| fin_mount.stl | 685.9KB | |
| fin_mount_inner_tube.stl | 135.9KB | |
| motor_mount.stl | 320.3KB | |
| nose_cone.stl | 158.5KB | |
| piston.stl | 37.6KB | |
| top_fin.stl | 17.3KB | |
| top_tube.stl | 76.2KB |
