Tube Connectors 3D Printer Model
The file 'Tube Connectors 3D Printer Model' is (stl,zip) file type, size is 21.2MB.
The file 'Tube Connectors 3D Printer Model' is (stl,zip) file type, size is 21.2MB.
I am sure these have been made many times before, but i couldn't find any good ones so decided to make my own. This are the first 3D things i made but they work rather good.I use them for my ant colonies, but they should be usable anywhere. Now for the Important Stuff
IMPORTANT IMPORTANT
You can resize these to whatever size you need.
V2 - Interior diameter is 6mm. Version A is normal, Version B has holes to hang on a nail on the bottom. Hanging it works good although I haven't left it up for an extended period of time. This is the only version with the holes.
V4 and V5 - Interior diameter is 8mm. Works great with 1/4 inch tubing. The only difference between them is V4 is larger but both still have the same insert length. I would recommend V5 unless you need the 8 and up connectors.
The test piece is 8mm if you want to test the fit.
There may be some strange artifacts in some of the more complicated models, but they all should print fine. Let me know if anyone has any problems or requests.
If you want some extras check out tube extras
| 6mmTo8mmStraight.stl | 553.0KB | |
| ConnectorTest.stl | 380.0KB | |
| EndPlugs.zip | 335.8KB | |
| V2.zip | 9.7MB | |
| V4.zip | 6.5MB | |
| V5.zip | 3.8MB | |
| V5Cross5wayForPicture.stl | 1.6MB |
