Hi,
I design some caps for creating cheap outdoor wifi 2.4ghz antenna.
Antenna has been created by Martin (https://martybugs.net/)
Antenna is made of :
1 piece of Electrical PVC pipe (Diameter 20)
1 blind cap
1 BNC cap
1 copper electrical wire 2.5mm²
1 Mount panel BNC connector
Marty's tutorial for calculate the antenna can be found here:
https://martybugs.net/wireless/collinear.cgi
Loop are created with 12mm drill bit
cap are glued on the tube.
Adjustement of cap are quite tight.
| BNC-PipeCap20mm.stl | 15.9KB | |
| PipeCap20mm.stl | 10.0KB |
