This is an adapter to mount a peugeot 106 gti cable throttlebody to a peugeot 206 intake manifold.
Or you can use it to mount a cable throttlebody to the aluminum c2 vts intake.

V1 was a prototype the top bolthole has to be drilled out towards the bottom, also the throttle mechanism hits the adapter, the other 2 mounting holes don't thread amazinglywell

V2 Has an oval shape top hole wich does not need any modifications and is proven to be PNP. The other 2 bolt holes (4mm) need to have m6 thread tapped into them.

I recommend sanding both sides after printing and mounting the throttlebody with liquid gasket maker(RTV) to make it air tight.

I recommend printing the V2 version it is plug and play, you just need to tap m6 thread for the two bolt holes to mount the throttlebody to the adapter.