I have addet a new Version (V3). In this version you need less material. In addition, threaded insert nuts (h: 8mm or less, w: 6mm) are now used instead of normal nuts.
Inspired by remixes, I also created a V3 variant with a removable arm. This is mounted by neodym magnets (6mmx3mm) that are glued into the base and arm. The arm is held in position with 4 noses.
Attention: For Version 3 you need my newly designed Makita Battery socket:
https://www.thingiverse.com/thing:4797077
For the older Versions you need the Battery Mount from GPlatek:
https://www.thingiverse.com/thing:352094
This is a Remix from
https://www.thingiverse.com/thing:2150796
To improve the stability, I steamed the parts with acetone.
Edit: I renewed it on Onshape:
https://cad.onshape.com/documents/f40f89512e547f89f0b3715a/w/7c3acf8db425541474ec3bbc/e/86ebf63768b9efeab6421e97
It was only drawn, but not printed out and tested.
| Makita_TS100_Holder_V3.step | 138.9KB | |
| Makita_TS100_Holder_V3.stl | 538.9KB | |
| Makita_TS100_Holder_V3_2parts.step | 196.6KB | |
| Makita_TS100_Holder_V3_holder.stl | 521.2KB | |
| Makita_TS100_Holder_V3_socket.stl | 305.1KB | |
| Soldering_iron_holder_TS100_-_holder.stl | 163.9KB | |
| TS100_-_Makita_Holder_renewed.step | 581.6KB | |
| TS100_-_Makita_Holder_renewed.stl | 2.3MB | |
| TS100_Makita_Aufsatz_2.stl | 512.9KB |
