TRX4M Axles 3D Printer Model
The file 'TRX4M Axles 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'TRX4M Axles 3D Printer Model' is (stl) file type, size is 1.3MB.
This is a work in progress of a printable front axle housing for the trx4m. For now its just a bare housing but I will be uploading different and more complete versions as I create them but wanted to share the bare housing for anyone that may want to do their own thing with it. some different versions im planning will be a +10mm per side, a rolled up pinion angle to help with front driveshaft binding, a couple different servo mount styles and who knows what else so suggestions are more than welcome! Print settings are kind of a shot in the dark from me because ive only printed test versions so far but will update as i find what works for me. ive included some 10mm axle spacers that I havnt had luck printing because there so small but if someone else could make them work that would be cool.
| +10mm_Tie_Rod.stl | 314.1KB | |
| 10mm_axle_spacer.stl | 39.3KB | |
| TRX4M_Axle_Housing_+10mm_no_servo_mount.stl | 582.1KB | |
| TRX4M_Axle_Housing_+10mm_servo_mount.stl | 591.0KB | |
| TRX4M_Axle_Housing_stock_width_no_servo_mount.stl | 610.1KB | |
| TRX4M_Axle_Housing_stock_width_servo_mount.stl | 615.3KB | |
| TRX4M_Front_Axle_Bare_Housing_+10mm_Per_Side.stl | 390.4KB | |
| TRX4M_Front_Axle_Bare_Housing_Stock_Width.stl | 429.5KB | |
| TRX4M_Rear_Axle_+10mm.stl | 578.5KB | |
| TRX4M_Rear_Axle_Stock_Width.stl | 602.2KB |
