Halo Warthog body, mounts and driver for the Traxxas TRX-4M RC car.
This fits on the factory frame and has mounts that replace the stock bumper mounts.
It is held on by magnets.
The front mount requires a small piece of metal bent into a Z-shape.
This could be improved upon, but I had some scrap sheet metal and didn't feel like tinkering further with the print.
You may want to scale this up slightly more, I wish I had printed it about 1cm longer, so that the front reached past the frame rails.
Update, I posted a new two-part body that has the winch on the front, and is split behind the cockpit for smaller print beds like mine.
Update 2: it sits too high for crawling well and has too much weight in the back. I'm going to experiment with some body weights but will so a remix to get it to sit lower.
| master_chief_arms_separated.3mf | 98.1KB | |
| master_chief_arms_separated.stl | 267.9KB | |
| simpler_warthog_body_bigger_cutouts_no_windshield_in_two_parts.stl | 5.4MB | |
| warhog_front_block.3mf | 67.0KB | |
| warhog_front_block.stl | 126.0KB | |
| warthog_back_cover.3mf | 30.0KB | |
| warthog_back_cover.stl | 27.1KB | |
| warthog_back_magnet_block.stl | 3.8KB | |
| warthog_body.3mf | 1.2MB | |
| warthog_body.stl | 5.2MB | |
| warthog_body_magnet_mounts.stl | 62.8KB | |
| warthog_driver.3mf | 106.9KB | |
| warthog_driver.stl | 242.2KB | |
| warthog_steering_wheel.3mf | 40.1KB |
