This Truck Construction Kit is an expansion pack to the "ThinkFun Maker Studio original set".
It's rather simple to assemble the truck by using the manual.
An advantage of this expansion pack is, that you can make some parts of cardboard or, if you want to, you can print them too. If you want to use cardboard, there are several templates in the manual to help you cutting the right size of the parts.
A detailed description and instruction of all the parts and how to assemble the truck is included in the manual (pdf file).
All parts from this expansion pack fit in a total build volume of 10 x 10 x 12,5cm (L x W x H).
You can vary the amount of the infill to in- or decrease the stability of the plates.
The resolution can be varied individually. E.g. the plates don't need the same high resolution as the connector parts.
For those who want to force an all-in-one print of this expansion pack I've added two STL files, one with all parts and one without the roof and the motor plates, in case you use cardboard. The total build volume is 10 x 10 x 12,5cm (L x W x H). For an all-in-one print supports are needed.
I don't recommend printing all-in-one because this could lead to a loss of quality and all parts are printed in the same color.
It is better to print e.g. all the connector parts together and the plates seperate and I recommend to use the provided single STL files of the parts.
| 3D_View_JUST_VISUAL.stl | 62.6MB | |
| all-in-one_print.stl | 32.4MB | |
| all-in-one_print_for_cardboard_use.stl | 30.7MB | |
| Connector_A.stl | 290.8KB | |
| Connector_B.stl | 279.0KB | |
| Connector_Bonnet.stl | 208.9KB | |
| Connector_C.stl | 278.8KB | |
| Front_Axle.stl | 117.8KB | |
| Front_Plate.stl | 2.2MB | |
| Hub_Cap_ThinkFun_Maker_Studio.STL | 478.7KB | |
| Large_Connector_ThinkFun_Maker_Studio.STL | 616.3KB | |
| Manual.pdf | 1.5MB | |
| Medium_Wheel_ThinkFun_Maker_Studio.STL | 519.4KB | |
| Motor_Bonnet.stl | 320.4KB | |
| Motor_Front_Cover.stl | 231.6KB | |
| Motor_Side_Cover.stl | 232.9KB | |
| OPTIONAL_Distance_Holder.stl | 87.1KB | |
| Pin-Nut.stl | 90.6KB | |
| Pin.stl | 164.7KB | |
| Rear_Axle.stl | 171.3KB | |
| Rear_Plate.stl | 3.0MB | |
| Roof_Plate.stl | 593.0KB | |
| Small_Connector_ThinkFun_Maker_Studio.STL | 344.4KB |
