This is a wire brush holder for an Tronxy X5SA Pro. Using a custom start script in your slicer software will let you clean the ooze from your nozzle before each print starts. you must cutoff the head of the brush
At my tronxy i can put the max XMax-way to 350MM without a crashing. this is necessary to use the brush
the brush ist like this one:
i have use the brass brush
The second Z hight you musst adjust to your printer
the gcode is:
G0 Z15; Start brush nozzle
G0 X345 Y70. F6000;
G0 Z6.0; Adjust the nozzle height - This will be different depending on the height of your bed.
G92 E0 ; zero the extruded length
G1 E10 F1500 ; Extrude 10mm of filament
G92 E0 ; zero the extruded length
G0 Y5
G0 X342
G0 Y70
G0 X350 F6000
G0 Y30
G0 X333
G0 Y35
G0 X350
G0 Y40
G0 X333
G0 Y45
G0 X350
G0 Y50
G0 X333
G0 Y150
G0 Z0.2; End brush nozzle
you musst add it to your startcode
let me know wenn the holder also work for other tronxy corexy printers
Do you like my work? then Support me
| Brush_holder_Tronxy_x5sa_Pro.stl | 64.1KB |
