Tronxy X5SA Direct Drive 3D Printer Model
The file 'Tronxy X5SA Direct Drive 3D Printer Model' is (stl) file type, size is 235.8KB.
The file 'Tronxy X5SA Direct Drive 3D Printer Model' is (stl) file type, size is 235.8KB.
When putting the M3 nuts into the back use a soldering iron to press them in. The extruder i used two 30mm bolts on the left looking from the front without any nuts and the right i used two 20mm bolts with a nut. You will need to cut 13mm off from where the belt mount use to be.
| Direct_Remix_V2.stl | 1.0MB |
