UPDATE 18/12/2019: I did realized that the mount of the extruder is a little bit tight to some kind of extruders like the one I have: Drakon. To solve this, I have modified the part and give enough room to hold almost all kind of extruders we have. The old one is ok for bowden but if you use Drakon, you have to mofify the case to fit the mount, as you can see in the pictures. As a solution, I uploaded a new versión that has the mounting holes 12mm displaced from the old one... Hope this version could fit your needs.
I have mine mounted on my Tronxy X3 but they are suitable for any printer with same mount. The carriage parts are fixed to have better hole coincidences and to make enough room for the self braked nut. Added supports for nema 17 motors.
Left-outer part was bigger in surface (added material in its front side) in order to keep almost the whole motor axis out of the bracket allowing an easy adjust of the pulley while being aligned with the centre of the 2020 profile.
Added holes in the inner brackets to use with nylon clamp to help fixing the crossing wires of nema17 and endstops.
| Tronxy_Z_Bracket_left.stl | 279.6KB | |
| Tronxy_Z_Bracket_left_in.stl | 227.4KB | |
| Tronxy_Z_Bracket_right.stl | 205.7KB | |
| Tronxy_Z_Bracket_right_fine_version12.stl | 533.9KB | |
| Tronxy_Z_Bracket_right_in.stl | 223.1KB |
![MK3s Extruder Carriage For Bear X-axis [RJ4JP Mod] 3D Printer Model](https://res.3axis.co/81242d65-8fa7-4ea8-b0ee-a3f4c66f0af9/images/7ac900e3-7dee-4dbe-9555-245c709f0be0_thumb.jpg)
![Ai3M X-Carriage [MK1] (E3DV5) 3D Printer Model](https://res.3axis.co/7163b9b5-4d27-4d08-8286-e1d66561e0f7/images/681c2415-d1f4-44a7-93cd-3ac7b25d8ec6_thumb.jpg)
