Tronxy X1 Belt Tensioner For Y Axis 3D Printer Model
The file 'Tronxy X1 Belt Tensioner For Y Axis 3D Printer Model' is (gcode,STL) file type, size is 2.7MB.
The file 'Tronxy X1 Belt Tensioner For Y Axis 3D Printer Model' is (gcode,STL) file type, size is 2.7MB.
If you like my designs consider buying me a beer, (donate) and following me
Please feel free to join a Tronxy group over here:
https://www.thingiverse.com/groups/tronxy-x1
Fully working Y-axis Tronxy x1 belt adjustable tensioner.
This is incomplete part, in order for this to work you need to print endcap, knob and bracket from this : http://www.thingiverse.com/thing:2020468
(I would include those files but its not my work so I dont want to go in any trouble this x tensioner is working with Tronxy X1 as well so I recomend you to print it as well.)
It was inspired by http://www.thingiverse.com/thing:2020468
Reuses existing bits. Only needs an M5x25 screw and an M5 nut.
I am also an idiot and therefore have no clue how to change orientation of this part to make it print way easier. Please stand it up by rotating it so its stands on in the same orientation as it will be mounted on printer.
It works well but you might be forced to take off belt from buildplate and attach it again, I menage to fit it without taking belt off.
Shaft that I am uploading here is PURERLY my work from scratch, all the other parts you can find here http://www.thingiverse.com/thing:2020468.
@Edit Added gcode that I used to print this off, I do not claim that it will work for you.
Fan Duct for cooling parts for Tronxy x1 http://www.thingiverse.com/thing:2201957
| CFP_pulley_mine.gcode | 10.4MB | |
| tensioner_for_tronxy_x1.STL | 173.1KB |
![[V8.0] One/Two-Up Extruder With Lever And Adjustable Tension (E3D Support!) 3D Printer Model](https://res.3axis.co/ee4c5817-b473-4259-bcbf-002fb7e94e09/images/0be1ff5d-45da-4031-8164-056678bbe2df_thumb.jpg)
