Tronxy P802MA Belt Clamp / Tensioner / SC8UU Bushing 3D Printer Model
The file 'Tronxy P802MA Belt Clamp / Tensioner / SC8UU Bushing 3D Printer Model' is (stl) file type, size is 55.3KB.
The file 'Tronxy P802MA Belt Clamp / Tensioner / SC8UU Bushing 3D Printer Model' is (stl) file type, size is 55.3KB.
Edit 10October2017 The belt channel has been deepened by 4mm to better align the belt.
I designed this to lower the bottom half of the X axis belt in X Carriage type systems. Specifically, this was designed as a replacement for the one I originally designed for my creation here https://www.thingiverse.com/thing:2520345
My original design held the belt to high and caused binding issues. I've redesigned the clamp and combined it with a 2 piece bearing bushing that takes the place of the bottom SC8UU bushing. To use it you'll need 4 x M4 screws to secure the top and bottom half of the part.
This was designed to work with my Tronxy P802MA and I don't know if it will work with other models.
| Tronxy_P802MA_Hotend_Carriage_Belt_Clamp_Bearing_Bushing.stl | 220.8KB |
