Trojan 3D Geared Extruder 1.75mm 3D Printer Model
The file 'Trojan 3D Geared Extruder 1.75mm 3D Printer Model' is (STL) file type, size is 51.1MB.
The file 'Trojan 3D Geared Extruder 1.75mm 3D Printer Model' is (STL) file type, size is 51.1MB.
The Trojan 3D Extruder is made for high performance and long hassle free life!!
Compatible with i3 and typical 23x23mm x-carriage hole patterns.
Very small footprint.
Nema 14 Motor with fully printed 0.6 module gears but ZERO backlash!!
Only 310 gr. fully assembled!! Less than a nema17 motor alone.
An easy simple idler with no springs
ED3 V6 or VOLCANO pack compatible
Integrated fans for a better cooling and no jam in all conditions
Integrated JST micro plug for a quick fan removal if service is required.
All the supports already integrated in the design, just remove it easily after print
2 parts main body for a very easy print and service
Water Cooled hotend version coming soon!!
| 5X14mm_IDLER-PIN.STL | 52.8KB | |
| BodyPart-1.STL | 2.7MB | |
| BodyPart-2.STL | 2.6MB | |
| Carter-4mm-Axe.STL | 8.3MB | |
| Carter-5mm-Axe.STL | 8.3MB | |
| Heat-Sink_Cooler.STL | 11.5MB | |
| Hot-End_Blower2_40x10mm.STL | 15.9MB | |
| Hotend_Blower-1-40mm.STL | 27.6MB | |
| Hotend_Blower-1.STL | 17.9MB | |
| Hotend_Blower-2.STL | 15.4MB | |
| HOTEND_CLAMP-REWORKED.STL | 9.1MB | |
| Idler_DX.STL | 6.0MB | |
| Idler_SX.STL | 6.0MB | |
| Retainer_Ring.STL | 171.4KB | |
| Spur_gear_0.6M_40T_20PA.STL | 318.2KB | |
| Spur_gear_M0.6_40-26T_20PA.STL | 507.5KB | |
| Spur_gear_M0.6_40-26T_MR105_5mm.STL | 507.5KB |
