This project is a tripod allowing to maintain a phone in all possible positions thanks to a ball joint.
The assembly is done without any screws, which however does not affect its robustness.
The goal for me is to create other supports that can accommodate this ball joint for other applications, such as in a car, for a camera stand, etc...
Enjoy printing !
If you don't have a printer, you can print it from https://www.jawstec.com/3d-printing-service/ or another online printer
âš âš âš Used tolerance by default between parts is 0.1mm âš âš âš
If your printer can't achieve this tolerance for moving parts (especially screws), use the files named 0.2mm or 0.3mm that have bigger tolerances.
I don't customize my designs, to the person, because I share them for free. A global solution is given (adapted to the greatest number), but I can't do it on a case by case basis, without remuneration for the time spent.
| Ball_Joint_01mm.stl | 2.0MB | |
| Ball_Joint_02mm.stl | 2.3MB | |
| Ball_Joint_03mm.stl | 2.2MB | |
| ball_joint_screw.stl | 2.0MB | |
| ball_joint_screw_standard-threadright_handed.stl | 2.0MB | |
| Frame.stl | 1.1MB | |
| Frame_up.stl | 858.3KB | |
| README_Model_details.txt | 3.8KB | |
| step_files.zip | 904.0KB | |
| tightening_screw_01mm.stl | 4.0MB | |
| tightening_screw_02mm.stl | 4.0MB | |
| tightening_screw_03mm.stl | 3.8MB | |
| Tripod_center.stl | 209.3KB | |
| Tripod_head_01mm.stl | 1.6MB | |
| Tripod_head_02mm.stl | 2.0MB | |
| Tripod_head_03mm.stl | 1.9MB | |
| Tripod_head_standard_threadright_handed.stl | 1.8MB | |
| Tripod_stand.stl | 80.3KB |
