Triple Fan for CR10S Pro
Double fan duct and one Front fan
Update
13/09/19: The fixation of the center fan are now updated, i added a little part for restrain the fixation to not rotate and drop on the bed like the V1 fixation
14/04/20: I added a thick version of the link plate "Tell me if it's better and more easy to print".
17/07/20: I added a new center fan support, fixed on the two hotend's screws, the file named "Center Fan Support (Screwable version)", two M3x25 screws needed to fix it.
CR10s Pro v1 Compatible, probably with the CR10s Pro v2 too because they have the same hotend.
/! In this projet i used A4x10 Noctua Fan but do not use this fans if you want more power /!
/! Be aware that this projet is only good on cooling down pieces on both sides and not for bridging /!
| Center_Fan.stl | 1.1MB | |
| Center_Fan_Support_Screwable_version.stl | 1.2MB | |
| Left_Fan.stl | 69.5MB | |
| Link_Plate.stl | 208.6KB | |
| Link_Plate_Thick_Version.stl | 207.6KB | |
| Right_Fan.stl | 87.0MB |
