This is a 22.5 degree curve that can be fit together with standard hot wheels track connectors. The cars can go flying if going too fast so if part of a larger track try creating a hill they have to go up to conserve some of that gravity so they can get going again. As seen in video here:
https://youtu.be/QjbwtZ6Tn9Y
Added a straight piece by request, it is 230mm long made with same sketch as turn i haven't tried printing it yet but should be easy.
Added extra pressure relief slots on the bottom to aid in some 3d printed couplers to fit easier.
11/5/2021, updated the general design to be just a little better fit with regular hot wheels track, the previous design was just ever so slightly too big. Use both updated Straight and updated Chicane. I left the old ones up so you could still match if you wanted more of them.
| chicane_v2.stl | 86.2KB | |
| chicane_v4.stl | 93.7KB | |
| Triple_Straight_v1.stl | 8.9KB | |
| Triple_Straight_v2.stl | 13.6KB | |
| UpdatedChicane.stl | 67.9KB | |
| UpdatedStraight.stl | 13.6KB |
