No glue, no nuts, no screws, easy to print, nice to use tickling fingers!
There are three sets of gears here:
To achieve the result you need to print:
side1 - print one
side2 - print one
set1 or set2 or set3 - print what you like (three gears)
It's recommended to use filament of different colors for gears and sides.
PETG, ABS, PLA - good choice for the thing filament
Creality, TEVO, Prusa, Anycubic, Wanhao, Reprap, Ultimaker - 100% printable with good result.
I use Ender 3 (with standard hotend 0.4) and about 1 hour to print this model.
You can use a thinner nozzle and layer height to archive maximum accuracy
May be you need sandpaper or nailfile to smooth edges.
You can also use another antistress toys I made:
https://www.thingiverse.com/thing:4855514
https://www.thingiverse.com/thing:4854632
https://www.thingiverse.com/thing:4857857
| set1-gear1.stl | 146.6KB | |
| set1-gear2.stl | 103.6KB | |
| set1-gear3.stl | 115.1KB | |
| set2-gear1.stl | 217.3KB | |
| set2-gear2.stl | 147.0KB | |
| set2-gear3.stl | 147.2KB | |
| set3-gear1.stl | 223.0KB | |
| set3-gear2.stl | 266.9KB | |
| set3-gear3.stl | 137.4KB | |
| side1.stl | 256.8KB | |
| side2.stl | 30.7KB |
