Trimph Tiger 1050 Sport Front Blinker Holder 3D Printer Model
The file 'Trimph Tiger 1050 Sport Front Blinker Holder 3D Printer Model' is (FCStd,stl,txt) file type, size is 331.3KB.
The file 'Trimph Tiger 1050 Sport Front Blinker Holder 3D Printer Model' is (FCStd,stl,txt) file type, size is 331.3KB.
This is an adapter for the Triumph Tiger 1050 Sport motorcycle blinker.
On my Triumph the blinker are mounted with M6 screw and an additional hole for the cables. Most of the aftermarket blinker comes with a M8 screw and cables pass trough the screw.
This holder follow the border off the cavity on the carter I've made 2 asymmetric parts (one for the left and one for the right carter)
With this adapter you can mount M8 threaded blinker on a M6 threaded motorcycle.
I've not road tested the adapter, try at your own risk. I suggest to print it with high resistance material (such as ABS) with 100% infill.
For general blinker holder, take a look on http://www.thingiverse.com/thing:1813351
As prescribed from GPL license, I include the "source" freeCAD file and a copy of the license.
| blinker_2.FCStd | 201.7KB | |
| blinker_2_LH.stl | 154.0KB | |
| blinker_2_RH.stl | 154.4KB | |
| gpl-2.0.txt | 17.7KB |
