Trigun Revolver AGL .45 With Mechanical Parts 3D Printer Model Free Download

Description Files (28)

Summary

A Totally new make of the revolver from the original Trigun anime. This is the post repairs version with the smooth side cylinder. There is also an optional fluted cylinder if you prefer that look, you only need to print one or the other.

Added renders showing the mechanical bits inside the frame, the Angel Plant under the top cover and the break action ejection.

Features:

Working break action with latch
Working ejector (if you add a spring)
Moving trigger and hammer
Clicky noise maker for when the cylinder is spun
Properly sized .45LC dummy cartridges
Removable top cover to show Angel Plant
Barrel and frame have ported cut outs

Chicago screws used for the frame pivot are a remix of https://www.thingiverse.com/thing:3776696 by T1nd3rb0x
Trigger mechanism is a remix of https://www.thingiverse.com/thing:3173889 by paulopereira

Assembly instructions:

Cylinder: If you want it to auto eject, you will need a spring with an outer diameter of no more than 12mm and in inner diameter of no less than 6mm and a length of at least 15mm. You can skip the spring if you want and just snap the ejector in place.

Drop the spring into the central opening of the cylinder body
Align the ejector to the cylinder body so that the square peg is aligned with the square cutout and the spring loaded hook is aligned to the cutout on the inside, this will let it snap in place and move in and out as needed without getting lost.

Upper Frame:

Insert the barrel so that it aligns with the peg facing upward
slide the barrel shroud over the barrel and it should align correctly to the frame
If everything looks good you can glue them in place
Once the barrel is in, add the cylinder pin and glue it in place.
The cylinder can now slide into place on the cylinder pin
The Top cover should now snap into place connecting the barrel shroud and frame, no need to glue unless you do not care about the extra details

Lower Frame:

Start with the trigger assembly, please refer to the photos here https://www.thingiverse.com/thing:3173889. The only difference is one part was turned into a washer as it was not needed for this model.
Once assembled and tested, install the side plate, you can glue it at the fat peg nearest the frame hinge, the other end will be held in by the grip
Once that is assembled and the glue dry, you can add the grip and glue it in place

Once both the upper and lower frames are complete, use the fatChicagoScrews as the hinge for the frames, you can adjust how much tension you want by tightening or loosening the screw.

Change log:

12/4/2024:

Further strengthened the frame latch, should solve the issue of the thumb tabs breaking off.

12/2/24:

Adjusted thickness of the sides of the frame latch as well as the thickness of the thumb rest, it should be more robust now.

11/16/2024:

Removed rim from 2 of the 3 trigger pins as they prevented proper interlock with the frame as reported by fusionor

10/30/24

Adjusted frame latching mechanism to provide more clearance for the Cylinder
Adjusted Barrel Shroud to properly mate with the upper frame.
Added the option of a fluted cylinder to match the pre-repair look

10/29/24

Fixed issue with lower frame not mating properly with upper frame and increased hole depth for the trigger group pegs. New file has _V2 at the end.

10/25/24

Added color separated image to help assembling the trigger mechanism

10/24/24

Fixed the cylinder and Ejector, both made the external walls thicker and all the missing geometry that was causing issues should be resolved.
-Changed status to work in progress in case other issues come up. I ran out of filament when printing my copy so was not able to fully test things out.

10/20/24:

Fixed barrel shroud, it was missing a very important cutout
Adjusted trigger to have more clearance
Adjusted frame latch pivot pin to give more clearance
Made the chambers in the cylinder larger for easier insertion of the shells
fixed the ejector to match
Added basic assembly instructions

10/19/2024

If you downloaded before 10/19 you will need to re-download the FatChicagoScrewFemale_Fixed.stl There was something whack with the geometry and it totally failed in printing for me.

10/18/24:

If you downloaded this in the first hour it was up it had the wrong CylinderMainPin file, please download the new one that interfaces with the barrel indexing peg.

VashTheStampedeAngelArms4545LC_Print_as_many_as_you_want.stl	3.8MB
VashTheStampedeAngelArms45Barrel.stl	266.4KB
VashTheStampedeAngelArms45Barrel_Shroud_Fixed_V2.stl	364.7KB
VashTheStampedeAngelArms45Cylinder_Fluted.stl	1001.3KB
VashTheStampedeAngelArms45Cylinder_MainPin.stl	21.8KB
VashTheStampedeAngelArms45Ejector_FixedV2.stl	298.5KB
VashTheStampedeAngelArms45fatchicagoFemale_Fixed.stl	1.4MB
VashTheStampedeAngelArms45fatchicagoMale.stl	1.3MB
VashTheStampedeAngelArms45Frame_Latch_V4.stl	38.9KB
VashTheStampedeAngelArms45Frame_Pivot_Pin_Fixed.stl	6.1KB
VashTheStampedeAngelArms45Grip.stl	970.3KB
VashTheStampedeAngelArms45Hammer.stl	65.3KB
VashTheStampedeAngelArms45HammerLink.stl	13.2KB
VashTheStampedeAngelArms45HammerSpring.stl	9.3KB
VashTheStampedeAngelArms45Lower_Frame_V2.stl	1.5MB
VashTheStampedeAngelArms45NewSideplate.stl	188.4KB
VashTheStampedeAngelArms45pin2.stl	15.5KB
VashTheStampedeAngelArms45Plant_Cover.stl	1.6MB
VashTheStampedeAngelArms45RearCylinderCap_Left.stl	123.8KB
VashTheStampedeAngelArms45RearCylinderCap_Right.stl	126.7KB
VashTheStampedeAngelArms45SmoothSideCylinder_FixedV2.stl	974.4KB
VashTheStampedeAngelArms45Trigger.stl	61.1KB
VashTheStampedeAngelArms45Trigger_Fixed.stl	61.1KB
VashTheStampedeAngelArms45UpperFrame_V2.stl	389.1KB
VashTheStampedeAngelArms45Washer.stl	24.8KB
VashTheStampedeAngelArms45_FIXEDTriggerGroupPin.stl	6.1KB
VashTheStampedeAngelArms45_FIXEDTriggerGroupPin2.stl	6.1KB
VashTheStampedeAngelArms45_FIXEDTriggerGroupPinRimmed.stl	15.5KB

Trigun Revolver AGL .45 With Mechanical Parts 3D Printer Model

Summary

Tags

You might also like