TRIANGULAR BLADELESS FAN

!!! I AM REVIEWING THE DESIGN

AND THUS REMOVED THE

DOWNLOADABLE FILES TEMPORARILY !!!

A unique triangular design of the popular bladeless fan. The "bladeless" design uses an airfoil shape to suck and capture additional air, thus increasing overall air-flow and cooling.

Triangle 120mm.STL and STAND 120mm.STL have been updated to provide better airflow.
I am currently working on a hairdryer fan compatible version.

(See provided pictures for detailed component and design views)

The project requires a couple of other components:

• 92mm or 120mm computer fan (120mm recommended as the smaller fan does not provide enough airflow), A high end fan is also better as they provide more airflow, less blow-back and quieter operation.
• Power Supply (12V DC dependent on fan)
• On/Off switch (optional)
• Double sided tape,Cable ties or 4 x M4 nuts & bolts (To mount the fan onto the stands inner supports)
• Glue gun (Make sure to seal holes and connections to prevent air from escaping)

The following print settings are recommended:

• TRIANGLE 120mm.STL
  Layer Height: 0.2
  Infill: 30% (Grid)
  Supports: Yes (everywhere)
  Bed Adhesion: No

• TRIANGLE DUCT 120mm & 92mm.STL
  Layer Height: 0.2
  Infill: 30% (Grid)
  Supports: Yes (everywhere)
  Bed Adhesion: Brim

• STAND 120mm.STL
  Layer Height: 0.2 - 0.28
  Infill: 45% (Grid)
  Supports: Yes (touching building plate)
  Bed Adhesion: Brim

(The total print time is around 40 hours)

Please leave a like or comment ( :