I tried other printable trays for Zombicide figures, but they seemed to me not very comfortable.
I made a system for storing the figures of all in one standard box.
Each wall of this frame assembled from 2 same Wall details. You need 6 copies of the Wall. It connects by 3 pieces of Joint. Between each other, the walls are also connected transversely by Stiffener (6 pcs) for rigidity. I added complete sets of walls for one-time printing.
There are also 2 types of structure: Solid and Light. Solid looks better and stronger, but on Light, you save on the material is almost 50%. Time of printing is not so different.
The dimensions of the final construction are 298 mm x 298 mm. Height is 75 mm, i.e. in a large box from the Base, for example, below are still placed tiles and tokens.
To fit the box from Expansion Toxic City Mall (or Wolfsburg) try to reduce length (or maybe width too) all details up to 99%-98%. Try not reduce a height, because 3 figures may not fit after that.
Tray system for Massive Darkness here https://www.thingiverse.com/thing:2566851
| Joint.stl | 24.3KB | |
| Set_WallsLite.stl | 1.4MB | |
| Set_WallsSolid.stl | 822.4KB | |
| Stiffener.stl | 27.4KB | |
| TrayBackstop.stl | 29.3KB | |
| TrayLite.stl | 421.0KB | |
| TraySolid.stl | 48.1KB | |
| WallLite.stl | 183.5KB | |
| WallSolid.stl | 81.6KB |
