This is a winch remote bracket for the Traxxas TQI radio and the RC4WD winch. The remote slides in and is a tight friction fit. Use two M3x25mm or longer bolts and 2 M3 nuts to clamp the bracket onto the TQI remote. The bracket is directional and there are two sets of ridges on the inside faces to lock into the grips on the remote. The end of the mount with the ridges closest to the end goes towards the buttons on the remote. Print in PETG rather than PLA since some flex is needed to slide the remote in. Print in the default orientation and use supports.
| RC4WD_Remote_Holder.STL | 1.2MB |
