This is a trash bin for the BMW i3 that connects to the accessory slots in front of the middle console. I made it to work around the extra cup holder if you keep that in the middle slot.
The accessory slot connector was made with 70% infill for strength. It took less than 2 hours to complete. The bin was made with 20% infill but took a whopping 18 hours to build. I wanted the bin to reach all the way to the floor so there was no stress on the connector. I could have put small feet under the bin to make it smaller and thus less filament but this was my first run at this Thingy
| Accessory_Slot_Connector.stl | 119.6KB | |
| All_Parts.stl | 551.7KB | |
| Trash_bin.stl | 452.2KB |
