Transport Aircraft Toy Puzzle 3D Printer Model
The file 'Transport Aircraft Toy Puzzle 3D Printer Model' is (stl) file type, size is 10.4MB.
The file 'Transport Aircraft Toy Puzzle 3D Printer Model' is (stl) file type, size is 10.4MB.
OVERVIEW
The object is a toy style transport aircraft, split in parts for puzzle assembly.
It consists of only printed parts, and doesn't requrie glue to put together.
Check out the other models of the same serie from here:
https://cults3d.com/en/users/HeyVye/creations
Printing and assembly video:
https://www.youtube.com/watch?v=3IeNuz5jJn4
CONNECTION
K-Pin is a push-fit pin to connect parts together. It has a specially designed section profile with a shape of "K". The profile is optimised for 3D printing by being more forgiving on tolerance.
Use the included K-Pin pusher to push the pins into sockets.
MAKE
Print the parts in prepared orientation. Change filament color as you wish. The STL files consist of all parts at sufficient quantity.
The socket sizes for K-Pin in the design are all identical. Actual printed size of sockets might vary due to and filament shrinkage.
3D PRINTING SETTINGS
No supports. At least 15% infill.
0.2 layer height for landing gears and K-Pin. Any layer height for others.
| K-Pin_15mm_x50.stl | 492.3KB | |
| K-Pin_30mm_x10.stl | 82.1KB | |
| K-Pin_pusher.stl | 310.9KB | |
| K-Pin_remover.stl | 296.0KB | |
| TC_Body_front.stl | 1.6MB | |
| TC_Body_nose.stl | 575.7KB | |
| TC_Body_side.stl | 1.2MB | |
| TC_Body_tail.stl | 1.2MB | |
| TC_Engine_inside.stl | 3.8MB | |
| TC_Engine_shell.stl | 4.5MB | |
| TC_Landing_gear.stl | 673.3KB | |
| TC_Landing_wheel.stl | 2.6MB | |
| TC_Window.stl | 235.6KB | |
| TC_Wing.stl | 5.2MB |
