Transmission Oil Cooler Fuel Hose Line Plug 10mm ID Toyota Tundra 3D Printer Model
The file 'Transmission Oil Cooler Fuel Hose Line Plug 10mm ID Toyota Tundra 3D Printer Model' is (stl) file type, size is 48.0KB.
The file 'Transmission Oil Cooler Fuel Hose Line Plug 10mm ID Toyota Tundra 3D Printer Model' is (stl) file type, size is 48.0KB.
I was changing the radiator on my 2002 Toyota Tundra, automatic transmission, and decided that I wanted to do the timing belt, water pump, cam/crank seals, etc. while the radiator was out. I did not have time to finish it all in one day. Well, the transmission cooler lines are leaking the entire time, even with clamps on the hoses. Also, I don't like the idea of crushing the hoses with clamps for a long period of time, especially old hoses.
I decided to make plugs for the transmission cooler lines. Obviously, these are not vehicle specific and should fit any vehicle with 10mm ID hoses/lines. Size up or down to fit other transmission, oil, etc. hoses/lines.
If you want a different size, let me know and I will probably make it and publish it.
| Transmission_Line_Plug.stl | 139.5KB |
