TRANSFORMERS G1 ROTORSTORM REBUILD SET WITH ARTICULATION UPGRADE KIT 3D Printer Model
The file 'TRANSFORMERS G1 ROTORSTORM REBUILD SET WITH ARTICULATION UPGRADE KIT 3D Printer Model' is (stl) file type, size is 5.5MB.
The file 'TRANSFORMERS G1 ROTORSTORM REBUILD SET WITH ARTICULATION UPGRADE KIT 3D Printer Model' is (stl) file type, size is 5.5MB.
this is a complete copy of the 80s Rotorstorm figure plus an articulation add on kit.
right now have a full articulation of hands and legs with no need to damage the original figure. I have copied the legs so that You don't need to split them and drill out the connecting slab (You can still do that if You feel competent, depends on the result You want to accomplish)
in order to open the body You will have to knock the tail pins out.
the project is free but it would be nice if you gave some appreciation and contributed so i can keep wasting my time on doing cool stuff like that ;) if you want to contribute please leave a tip here or go to paypal.me/PiotrSidoruk
thanks and enjoy!
| arm_v1_R_01.stl | 542.6KB | |
| arm_v1_R_02.stl | 321.1KB | |
| arm_v1__L_01.stl | 562.0KB | |
| arm_v1__L_02.stl | 317.3KB | |
| body_v1_back_flap_L.stl | 358.4KB | |
| body_v1_back_flap_R.stl | 361.7KB | |
| body_v1_front.stl | 2.2MB | |
| body_v2_back.stl | 3.9MB | |
| cannon_bullet.stl | 5.0MB | |
| cannon_L.stl | 2.5MB | |
| cannon_R.stl | 2.3MB | |
| canopy_base_v1.stl | 736.6KB | |
| canopy_v1.stl | 606.5KB | |
| canopy_v2_window_pt1.stl | 11.9KB | |
| canopy_v2_window_pt2.stl | 32.1KB | |
| canopy_v2_window_pt4.stl | 46.9KB | |
| canopy_v3_pt1.stl | 695.7KB | |
| canopy_v3_pt2.stl | 97.2KB | |
| foot_v3.stl | 694.3KB | |
| foot_v3_hinge.stl | 768.4KB | |
| foot_v4.stl | 784.5KB | |
| foot_v4_hinge.stl | 758.1KB | |
| head_balljoint.stl | 608.5KB | |
| head_pt1_v2.stl | 20.6KB | |
| HEAD_PT2.stl | 63.4KB | |
| HEAD_PT3.stl | 28.6KB | |
| hip_balljoint.stl | 1.4MB | |
| leg_v1_L_01.stl | 1.3MB | |
| leg_v1_L_02.stl | 1.2MB | |
| leg_v1_R_01.stl | 1.3MB | |
| leg_v1_R_02.stl | 1.2MB | |
| rotor_disc_btm_G1.stl | 117.1KB | |
| rotor_disc_top_G1.stl | 257.2KB | |
| rotor_G1.stl | 104.4KB | |
| rotor_pin_G1.stl | 193.9KB | |
| rotor_slider_G1.stl | 78.0KB | |
| shoulder_mount_v3_L_undercut_pt2.stl | 161.5KB | |
| shoulder_mount_v3_L_undercut_pt3.stl | 5.4KB | |
| shoulder_mount_v3_R_undercut_pt2.stl | 162.1KB | |
| shoulder_mount_v3_R_undercut_pt3.stl | 5.5KB | |
| shoulder_mount_v5_L_undercut_pt1.stl | 357.9KB | |
| shoulder_mount_v5_L_undercut_pt4.stl | 158.2KB | |
| shoulder_mount_v5_L_undercut_pt5.stl | 63.9KB | |
| shoulder_mount_v5_R_undercut_pt1.stl | 359.0KB | |
| shoulder_spacer_v1.stl | 93.7KB | |
| shoulder_v2_02_connector.stl | 9.8KB | |
| shoulder_v3_01.stl | 194.5KB | |
| shoulder_v3_02_L.stl | 193.2KB | |
| shoulder_v3_02_R.stl | 261.6KB | |
| tail_connector_v2.stl | 31.6KB | |
| tail_ednd_L_v1.stl | 1.1MB | |
| tail_ednd_R_v1.stl | 1.1MB | |
| tail_end_pin_v2.stl | 20.7KB | |
| tail_end_v2_L.stl | 2.4MB | |
| tail_end_v2_R.stl | 2.4MB | |
| tail_spacer.stl | 113.1KB | |
| thigh_v3_01.stl | 703.6KB | |
| thigh_v3_02_L.stl | 542.0KB | |
| thigh_v3_02_R.stl | 230.5KB | |
| wing_connector_v1_L.stl | 2.5MB | |
| wing_connector_v1_R.stl | 2.5MB | |
| wing_L_v1.stl | 1.3MB | |
| wing_R_v1.stl | 1.2MB | |
| wing_v3_L_pt1.stl | 1.1MB | |
| wing_v3_L_pt2.stl | 226.9KB | |
| wing_v3_R_pt1.stl | 1.1MB | |
| wing_v3_R_pt2.stl | 229.3KB |
