TramLoc For OS-Railway 3D Printer Model
The file 'TramLoc For OS-Railway 3D Printer Model' is (stl,pdf,zip) file type, size is 8.9MB.
The file 'TramLoc For OS-Railway 3D Printer Model' is (stl,pdf,zip) file type, size is 8.9MB.
Tram Locomotive like train with wormwheel transmission (2 axis).
When I created this thing the objective was to use a worm wheel transmission with a N20 motor to drive two axis at a time and the use of bogies.
The current bogies used are ugly.
Maybe when the corona troubles end, I will go to the HOVM museum in The Hague.
People are busy there with restoring a version (2310/H51).
The design is for use with 32 mm gauge. (scale 1:45)
The batteries used are 14500 Li ion batteries.
The worm wheel axis is driven via a gear by a 6V N20 motor. I test it with a 1500 rpm motor)
When you use the arduino software treinV2 , you have to change the wifi parameters in the include file customizeWifi.h to the values of your site.
More info of the locomotive can be found here:
https://www.monumentenzorgdenhaag.nl/monumenten/elektrische-locomotief-h51
http://www.nmld.nl/nl/object/2397 (not secure!)
| afstandBus14_0.stl | 37.6KB | |
| afstandBus9_05..stl | 37.6KB | |
| BaseV3.stl | 972.5KB | |
| BogieV2.stl | 434.7KB | |
| BoorHulpWheelMotorV2.stl | 123.1KB | |
| BoorHulpWheelV2.stl | 99.3KB | |
| BufferShieldV1.stl | 13.4KB | |
| BufferV2.stl | 60.1KB | |
| CabinV2.stl | 604.8KB | |
| Drv8833HolderV1.stl | 4.6KB | |
| Electronic_schema_TramLoc.pdf | 52.6KB | |
| FrontChassisV4.stl | 1.0MB | |
| Handle1V1.stl | 54.6KB | |
| Handle2V1.stl | 54.6KB | |
| Handle3V1.stl | 45.6KB | |
| Handle4V1.stl | 39.6KB | |
| HandleHolderV1.stl | 18.8KB | |
| HatchV1.stl | 6.5KB | |
| HookV1.stl | 15.7KB | |
| HulpLedSoldeerHulpV1.stl | 52.4KB | |
| MotorBogieV2.stl | 351.3KB | |
| N20MotorCap.stl | 24.5KB | |
| N20MotorHolderV3.stl | 63.9KB | |
| N20PinionM8T14.stl | 121.8KB | |
| P1SideV3.stl | 7.4MB | |
| P2BaseV1.stl | 272.0KB | |
| P3TopHolderV1.stl | 524.5KB | |
| P4V1.stl | 89.1KB | |
| P5ScateV1.stl | 18.2KB | |
| P6V2.stl | 5.0KB | |
| P7V2.stl | 5.0KB | |
| RoofV2.stl | 163.6KB | |
| SecondGearN20M8T13.stl | 118.8KB | |
| SwitchHolderV1.stl | 126.6KB | |
| TramKoppelingHolderV1.stl | 31.2KB | |
| TramKoppelingV1.stl | 32.1KB | |
| TramLoc_V1_1.pdf | 1.9MB | |
| TreinV2.zip | 6.6KB | |
| WheelMotorGripV1.stl | 26.7KB | |
| WheelMotorV1.stl | 41.2KB | |
| WheelV2.stl | 30.0KB | |
| WormBearingHolderV1.stl | 38.0KB | |
| WormWielAfschM8L102.stl | 4.6MB | |
| WormWielGearT13L10.stl | 368.8KB |
