I make my adaptation of the Tram (Lilpop III)" by Pietia,
I make it in order to use it with an BTTB SNCF mechanics at TT scale rails. This tram is now at H0m scale (1:87).
Only the boogie is adapted to my mechanics.
For the 2 variants with old pantograph: It will be need a 0,8mm diameter OL wire for fixing the pantograph. The pantograph can be rotated 90 degress left or right.
I saw on the internet this kind of tram was later adapted to scissors pantograph. I did made this variant, too. You must use the scissors pantograph from BTTB SNCF startset locomotive.
Must be printed with resin printer. Tough resin if you have.
I use spray paint.
It is my 8 object printed for this mechanics (second tram).
I allready use this mechanics for 3 railbuses adapted by me: M11, AC Railbus, Ganz 1903,
https://www.thingiverse.com/thing:5935021
https://www.thingiverse.com/thing:5443769
https://www.thingiverse.com/thing:5429260
I also use it for my adaptation of a tramway:
https://www.thingiverse.com/thing:6580391
I also use it for my 2 adaptations of boxcabs:
https://www.thingiverse.com/thing:6580336
https://www.thingiverse.com/thing:6578923
And I also use it for Tomek railbus T1 GHE (scaled at 134%)
https://www.thingiverse.com/thing:5897107
I accept any donation of TT scale railway. Nobody donate it nothing yet. Hope die last.
My email address is [email protected]
| Tram_Lilpop_III_carcasa.stl | 3.0MB | |
| Tram_Lilpop_III_carcasa_pt_pantograf_foarfeca.stl | 3.8MB | |
| Tram_Lilpop_III_carcasa_pt_pantograf_vechi.stl | 3.8MB | |
| Tram_Lilpop_III_pantograf_vechi.stl | 53.6KB |
