Training Handgun 3D Printer Model
The file 'Training Handgun 3D Printer Model' is (stl) file type, size is 11.9MB.
The file 'Training Handgun 3D Printer Model' is (stl) file type, size is 11.9MB.
A few designs for training, costumes or airsoft accessory. With undermount light design and with light and optic design. Print with supports, glue two pieces together for cleanest look. Printing in PLA filament in full mode is tough as it always comes out with some rough angles.
| EN4MAX_EN3PRO_Connecting_Pin_RMR.stl | 134.7KB | |
| EN4MAX_FULL2_RMR2.1.stl | 26.6MB | |
| EN4MAX_RMR_NO_OPTIC_FULL.stl | 19.0MB | |
| EN4MAX_RMR_W_OPTIC_LEFT.stl | 18.2MB | |
| EN4MAX_RMR_W_OPTIC_RIGHT.stl | 10.6MB | |
| EN4MAX_SPLIT_NO_OPTIC.stl | 20.2MB | |
| EN4MAX_SPLIT_NO_OPTIC_LEFT.stl | 13.4MB | |
| EN4MAX_SPLIT_NO_OPTIC_RIGHT.stl | 7.0MB | |
| EN4MAX_SPLIT_RMR2.1.stl | 28.6MB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
