Trailer For WILLYS JEEP 3D Printer Model
The file 'Trailer For WILLYS JEEP 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Trailer For WILLYS JEEP 3D Printer Model' is (stl) file type, size is 1.2MB.
Made this trailer for the WILLYS JEEP of Soarpix.
This is my own design. Only the wheels are used from the orginal Jeep.
I used some super glue for parts. Like the trailer body mounts, lights and the towbar. The trailer body mounts are made to hold the body and the trailer together.
Trailer Frame: Support needed. Print the flat side on the bed.
Body Trailer: No support needed.
Wheels: No support needed
Wheel Axle: I Used a 5mm thread
Tailgate: No support needed. Just use a brim. Print it vertical
Lights: No support needed
Trailer towbar: Support needed.
Trailer body mount: No support needed
| Body_Trailer.stl | 130.4KB | |
| Frame_Trailer.stl | 461.8KB | |
| Trailer_body_mount.stl | 47.0KB | |
| Trailer_rear_light.stl | 449.3KB | |
| Trailer_tailgate.stl | 153.8KB | |
| Trailer_Towbar.stl | 594.4KB | |
| Trailer_Turn_Signal.stl | 70.3KB | |
| Wheel_L.stl | 1.1MB | |
| Wheel_R.stl | 1.1MB |
