Trailer For The FPV-Rover 3D Printer Model
The file 'Trailer For The FPV-Rover 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Trailer For The FPV-Rover 3D Printer Model' is (stl) file type, size is 3.5MB.
This is a remix of the OpenRC Truggy designed by Steamerzone.
http://www.thingiverse.com/thing:378042
The tires are a remix of the small tire by Bastien.
http://www.thingiverse.com/thing:626863
It is designed for the FPV-Rover (V1.0)
http://www.thingiverse.com/thing:1240754
And for the FPV-Rover (V2.0)
https://www.thingiverse.com/thing:2952852
Follow us on http://fpv-treff.de/viewtopic.php?t=7615
| center_part1.stl | 438.0KB | |
| center_part2.stl | 227.7KB | |
| center_part3.stl | 226.6KB | |
| fender_complete.stl | 187.5KB | |
| fender_part1.stl | 83.4KB | |
| fender_part2.stl | 80.8KB | |
| frame_front_complete.stl | 338.6KB | |
| frame_front_part1.stl | 201.8KB | |
| frame_front_part2.stl | 279.3KB | |
| frame_hitch.stl | 141.0KB | |
| frame_rear_complete.stl | 305.7KB | |
| frame_rear_part1.stl | 172.0KB | |
| frame_rear_part2.stl | 150.9KB | |
| front_complete.stl | 225.5KB | |
| front_part1.stl | 79.9KB | |
| front_part2.stl | 79.4KB | |
| front_part3.stl | 69.4KB | |
| hinge_coupler.stl | 109.3KB | |
| ramp_complete.stl | 373.3KB | |
| ramp_part1.stl | 172.1KB | |
| ramp_part2.stl | 100.8KB | |
| ramp_part3.stl | 95.4KB | |
| rim.stl | 131.1KB | |
| side.stl | 255.2KB | |
| tire.stl | 427.2KB | |
| trailer_complete.stl | 5.8MB |
