Traeger Smoker Knob Replacement 3D Printer Model
The file 'Traeger Smoker Knob Replacement 3D Printer Model' is (stl,3mf,f3d) file type, size is 1.3MB.
The file 'Traeger Smoker Knob Replacement 3D Printer Model' is (stl,3mf,f3d) file type, size is 1.3MB.
Our older Traeger knob snapped in half and I wasn't able to find anywhere that just sold the knob so I decided to just print it!
This fits perfectly, but REQUIRES the old grub screw and center insert from the old knob. I will not be doing a different version that doesn't require that, but feel free to use my files to make one if you want!
This has 2 files, the knob itself, and the insert that has the "arrow" to know what you have it set to. They are separate purely because I wanted to have different colors for it and I don't have a printer that can do multiple colors. So this was the next best option.
Print the two pieces, put a little bit of nail polish for the arrow (or something similar), and glue to the insert to the knob.
I will not be making a version that combines together, but feel free to use the files to make it if you want!
I used HTPLA, but PETG or something with higher heat resistance may be better, but I haven't had any issues yet with just HTPLA.
Note: do not worry about the grub screw needing to thread into the printed knob, it DOES NOT get threaded into the printed knob but rather the insert is already threaded.
| Inset.stl | 1.2MB | |
| Knob.stl | 7.9MB | |
| TraegerSmoker_Knob.3mf | 308.4KB | |
| TraegerSmoker_Knob.f3d | 176.6KB |
