Track Helix (Gleiswendel) for H0 Tracks, 360 / 437.5mm radius double track - created for Maerklin M-Tracks, should also work with C-Tracks.
It takes ages to print and a lot of filament - buying would be faster & cheaper - but just because I can :)
Customizer / SCAD file allows to define height, laps and a start hight / end height to provide room for changing to the angle.
MIN PRINT AREA 210mm
...or the roundramp does not fit (printed on ANYCUBIC S without skirt / raft but a separate pre-print shape to get the filament flow)
e.g. I build a separate ramp of 3 90mm tracks with 1% / 2% / 3% incline to achieve the good 3% incline I have on my model. resulting in 5.4mm starting height - since I have my base level lifted by 4mm, the STL files loaded have a start height of 9.4mm and end height of -5.4mm (for another ramp to get the track flat)
recommended to not exceed 5% incline, and pass through height to be above 75mm
| Basebracket00.stl | 276.8KB | |
| Basebracket01.stl | 101.0KB | |
| Basebracket02.stl | 101.2KB | |
| Basebracket03.stl | 101.5KB | |
| Basebracket04.stl | 101.3KB | |
| Basebracket05.stl | 100.4KB | |
| Basebracket06.stl | 99.3KB | |
| Basebracket07.stl | 100.3KB | |
| Basebracket08.stl | 100.0KB | |
| Basebracket09.stl | 100.3KB | |
| Basebracket10.stl | 99.4KB | |
| Basebracket11.stl | 119.9KB | |
| Bracket.stl | 101.6KB | |
| Gleiswendel_10v2.scad | 10.9KB | |
| inner_stand.stl | 1.9MB | |
| round-mid-ramp_v2.stl | 844.7KB | |
| round-ramp-end.stl | 6.3MB | |
| round-ramp-start.stl | 6.3MB | |
| round-ramp_v2.stl | 3.2MB | |
| roundramp_v2.scad | 18.9KB | |
| startramp2_first.stl | 1.8MB | |
| startramp2_second.stl | 1.2MB | |
| startramp_3.stl | 1020.6KB | |
| Topbracket.stl | 69.9KB |
