This is an altered version of my previous design, to enable the drone carrying a bigger camera on the top deck and accommodating a mini FPV cam on the lower deck. Reusing the robust design of the first version, easily replaceable arms in case of high speed/impact accidents :). Also reinforced landing legs, and all optimized for small printers to easy print...
Video, my first FPV flight:
http://2ld.nz/S
I used the following parts to build the drone:
Naze32 10DOF flight controller
http://2ld.nz/g
ORX Full Range 2.4GHz 6 CH remote Controller
http://2ld.nz/f
Drone Matters ESC (I have no links, but I think other 12A ESC would do)
Sunny Sky X2204S 2300KV motors
http://2ld.nz/h
props:
http://2ld.nz/P
cam:
http://2ld.nz/Q
FPV kit:
http://2ld.nz/R
And and old big tachyon HD action cam... No
The battery(3S 1500mAh) is mounted underneath with Velcro to increase stability,
I used M3 screws and bolts to put the frame together.
And nylon spacers and screws to mount the controller and the top deck.
| fpvcam.stl | 100.5KB | |
| Tom_quad_arm.stl | 325.2KB | |
| Tom_quad_base_lower.stl | 639.5KB | |
| Tom_quad_base_upper.stl | 809.5KB | |
| Tom_quad_cam_plate.stl | 117.2KB | |
| Tom_quad_legV2L.stl | 90.8KB | |
| Tom_quad_legV2R.stl | 90.8KB | |
| Tom_quad_top_V2.stl | 273.4KB |
