TPU Syringe Adapters For Aquarium Conditioners, Fertilisers, Etc. 3D Printer Model
The file 'TPU Syringe Adapters For Aquarium Conditioners, Fertilisers, Etc. 3D Printer Model' is (3mf,stl) file type, size is 2.1MB.
The file 'TPU Syringe Adapters For Aquarium Conditioners, Fertilisers, Etc. 3D Printer Model' is (3mf,stl) file type, size is 2.1MB.
Adapters that allow you to easily and accurately dose aquarium conditioners and fertilisers straight from the bottle with a syringe. I used the original model as a base to create a more “universal” shape that should be scalable to fit most, if not all, bottles. So far, I've printed and tested adapters for 100ml Seachem and 250ml Easy-Life bottles and am planning to do more later as the need arises. The adapters sit flush and allow the cap to be closed all the way.
PRINT IN A FLEXIBLE FILAMENT. I used PrimaCreator EasyPrint FLEX TPU with shore hardness of 95A. Diameter of the included syringe hole is 4mm, it fits the syringes that I use but I'm not familiar with syringe sizes so it might fit many different kinds or it might not. That's why I also added a file without a hole for each adapter so you can add one of the correct size in your slicer.
| Easylife_250ml_adapter.3mf | 512.6KB | |
| Easylife_250ml_adapter.stl | 1.2MB | |
| Easylife_250ml_adapter_nohole.stl | 899.2KB | |
| Seachem_100ml_adapter.3mf | 514.2KB | |
| Seachem_100ml_adapter.stl | 1.2MB | |
| Seachem_100ml_adapter_nohole.stl | 899.2KB |
