TPU squishy mounts for Emax 2205 or any motor with 19 x 16 mm hole pattern. Center hole is 8mm, choice of 3 thicknesses.
Washers included if you need them are 1 mm thick.
Use threadlock.
EDIT: One of my quads has arms that are not as wide as the diameter of the motors so I've added mounts with a ring around to protect the bottom of the motors.
| 16x19x3x8x1.5mm_damper.stl | 655.7KB | |
| 16x19x3x8x1.5mm_ringed_damper.stl | 1.9MB | |
| 16x19x3x8x1.5mm_ringed_damper_cutout_for_wires.stl | 1.8MB | |
| 16x19x3x8x1mm_damper.stl | 655.7KB | |
| 16x19x3x8x2mm_damper.stl | 655.8KB | |
| 16x19x3x9x1.5mm_T-Motor_F40Pro.stl | 661.1KB | |
| 16x19x3x9x1.5mm_with_high_ring.stl | 3.1MB | |
| 16x19x3x9x1mm_damper.stl | 661.1KB | |
| 16x19x3x9x2mm_damper.stl | 661.1KB | |
| washer.stl | 2.1MB |
